The Best Nodemcu Esp8266 Development Board – 2022

After hours of researching and comparing all models on the market, we find out the Best Nodemcu Esp8266 Development Board of 2022. Check our ranking below.

Our Picks For The Top Nodemcu Esp8266 Development Board

Overall Product Rankings

Rank No. 1
KeeYees 2pcs Expansion Board Kits GPIO 1 into 2 for ESP8266 ESP-12E NodeMCU WiFi Development Board
  • √【For ESP8266 ESP-12E】: Specially designed by KeeYees technical team. It is fully compatible with ESP8266 ESP-12E.
  • √【GPIO 1 into 2】: This expansion board can expand one GPIO pin of Development Board to two, which is convenient for users to reuse pins for large-scale smart home projects.
  • √【2 Type Connections】: Two connection methods: Pin Header Connector & Screw Terminal. Just select them according to your purpose.
  • √【Double-Layer PCB】: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
  • √【Updated Version】: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
Rank No. 2
HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)
  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module
  • Built-in Micro-USB, with flash and reset switches, easy to program
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
Rank No. 3
KeeYees 2pcs Expansion PCB Board with Screw Terminal Block Pin Header for ESP8266 for NodeMCU WiFi Development Board
  • ★ For ESP8266 ESP-12E ★ Specially designed by KeeYees technical team. It is fully compatible with ESP8266 ESP-12E. It expands all the pins, which is very suitable for the project on the ESP8266 module.
  • ★ GPIO 1 into 2 ★ This expansion board can expand one GPIO pin of Development Board to two, which is convenient for users to reuse all pins in smart home projects. Not only can the pins be connected through the pin header part, but also the terminal part can be expanded to lead out the same pins. Just select them according to your purpose.
  • ★ Mini PCB Breadboard ★ An independent power row hole is led out at the front end of the PCB board. The required fixed components can be directly welded to facilitate circuit design.
  • ★ Double-Layer PCB ★ The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
  • ★ Complete Parts ★ This kit contains enough parts, such as customized PCB board, screw terminals, pin headers. You just need to solder them together.
Rank No. 4
HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU
  • ESP32 WIFI Kit for Arduino ESP8266 NodeMCU
  • Operating voltage: 3.3V to 7V; Supports Sniffer, Station, softAP and Wi-Fi Direct modes
Rank No. 5
KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino
1,131 Reviews
KeeYees 3pcs ESP8266 ESP-12E Development Board WiFi WLAN Wireless Module CP2102 for NodeMCU for ESP-12E for Arduino
  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.
  • The development board has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board. Support smart link smart networking.
  • The fast and affordable technology for WiFi. Make your development the fastest way combined with firmware for NodeMcu.
  • Modern, state-of-the-art LUA technology. It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins.
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track.
Rank No. 6
HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module (Pack of 2PCS)
601 Reviews
HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module (Pack of 2PCS)
  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module
  • Built-in Micro-USB, with flash and reset switches, easy to program
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
  • Data download access to the website: http://www.nodemcu.com
Rank No. 7
KeeYees ESP8266 ESP-12F NodeMcu Mini WLAN WiFi Development Board 4M Bytes for ESP8266 for Arduino Compatible with WeMos (5PCS)
  • Mini Development Board based on ESP8266 chip.
  • This board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro USB connection.
  • This board is 100% compatible with for Arduino and for WeMos.
  • WIFI development board, with 4 MB of flash memory.
  • Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
Rank No. 8
6pcs ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython New Version
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
  • ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
  • Nodemcu v3, Upgraded to CH340 chip; Power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking.
  • Compatible with Arduino compatible, Available install NodeMCU 1.0 library in the Arduino IDE. This ESP8266 NodeMcu development board can be use for small temperature and humidity monitor in home automation project and works very well with the arduino development platform.
Rank No. 9
Songhe ESP8266 NodeMCU V3 CP2102 ESP-12E 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython (3PCS)
  • Supporting three modes: AP, STA, and AP+STA;upporting Lua program, easily to develop
  • The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.
  • The development board integrates GPIO, PWM, IIC, 1-Wire and ADC in one
Rank No. 10
ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini (5pcs)
  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX.
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0); 1 analog input(3.2V max input). Micro USB connection; Compatible with Arduino; 1MB Flash; 500mA resettable fuse.
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply)onboard.
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE.

How Do You Buy The Best Nodemcu Esp8266 Development Board?

Do you get stressed out thinking about shopping for a great Nodemcu Esp8266 Development Board? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Nodemcu Esp8266 Development Board, which is why we have assembled a comprehensive list of the greatest Nodemcu Esp8266 Development Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Nodemcu Esp8266 Development Board that you consider buying. Your questions might include the following:

  • Is it worth buying an Nodemcu Esp8266 Development Board?
  • What benefits are there with buying an Nodemcu Esp8266 Development Board?
  • What factors deserve consideration when shopping for an effective Nodemcu Esp8266 Development Board?
  • Why is it crucial to invest in any Nodemcu Esp8266 Development Board, much less the best one?
  • Which Nodemcu Esp8266 Development Board are good in the current market?
  • Where can you find information like this about Nodemcu Esp8266 Development Board?

We’re convinced that you likely have far more questions than just these regarding Nodemcu Esp8266 Development Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Nodemcu Esp8266 Development Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Nodemcu Esp8266 Development Board. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Nodemcu Esp8266 Development Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Nodemcu Esp8266 Development Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Nodemcu Esp8266 Development Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Nodemcu Esp8266 Development Board?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Nodemcu Esp8266 Development Board.
  5. Customer Ratings: Number ratings grade Nodemcu Esp8266 Development Board objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Nodemcu Esp8266 Development Board.
  7. Product Quality: You don’t always get what you pay for with an Nodemcu Esp8266 Development Board, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Nodemcu Esp8266 Development Board is should be an indication of how long it will work out for you.

We always remember that maintaining Nodemcu Esp8266 Development Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Nodemcu Esp8266 Development Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.